Hot-Oil Pumping
Ruxley Integrated Global Services Limited is into Hot-Oiling and Pumping services and has a whole range of pumping and other equipment for various oilfield pumping services. Applications used but not limited to are:
Quality
Hot-Oiling Pumping Services
1
Hauling smaller volumes of fluid
2
Circulating and mixing large volumes of fluid
3
Heating large volumes of fluid (Frac jobs)
4
Bleeding gas pressure / fluid back to truck under pressure
5
Hydro testing
6
Hydrate pumping
7
Wellhead pumping (hot or cold)
9
Tubing
8
20K Front Axle
10
Casing
11
Corrosive pumping
12
Well kill jobs
13
Well kill jobs
14
Hot oiling (heating oil and pumping down tubing / casing, and flowline for paraffin and wax control)
15
Making steam
16
Circulating large production tanks
17
Specs of Unit
18
Kenworth T800 tandem truck
19
One storage tank 3 Compartments (2 compartments with 4m3 capacity each) 8m3 total volume for product being pumped
20
Third compartment used for 2000L storage for heating fuel
21
3” internal valves (stainless steel)
22
Gardner Denver TEEE triplex plunger pump (steel on steel seats)
23
2” relief valve
24
Maximum output 500L / min (1 ¼” discharge)
25
Electronic fluid counter
26
50’ of ¾” high pressure double braided hose (W.P. 5000 psi, 160L / min)
27
160’ of 1 ¼” seamless line pipe complete with chicsans (W.P. 6000 psi)
28
3” T&E gear pump (positive displacement) for loading / unloading and sucking back on lines
29
3” x 2” mission centrifugal pump for triplex charge, circulating and high volume output (maximum 1500L / min)
30
8 million BTU manufactured by Custom Welding heater for heating fluids (2” coil)
31
Approximately 295’ of 2” load / circulation hose) pressure rating 120 psi)
32
Approximately 35’ of 2” vent hose
33
High pressure fittings to accommodate ½”to 3” NPT, including EUE threads
34
Low pressure fittings to accommodate ½” to 4” NP
35
C-12 Cat Engine 380HP 18SP Fulle
36
46K RR Axle